The specs are 280mm long 6mm x 1 for the two bolts and the spacers are 10mm long, 13mm OD and 6.3mm ID. These mods will allow the factory port spacing to stretch from 80mm to 90mm.
Monday, January 30, 2012
ITB Spacing
So I got a little work done on the setup tonight. I welded on 10mm extensions onto each of the throttle linkage arms. After doing that I temporarily lengthened the two factory bolts by 30mm and added temporary 10mm spacers (junk, and left over parts). I will be ordering the 10mm spacers and longer bolts tonight.
The specs are 280mm long 6mm x 1 for the two bolts and the spacers are 10mm long, 13mm OD and 6.3mm ID. These mods will allow the factory port spacing to stretch from 80mm to 90mm.
The specs are 280mm long 6mm x 1 for the two bolts and the spacers are 10mm long, 13mm OD and 6.3mm ID. These mods will allow the factory port spacing to stretch from 80mm to 90mm.
Subscribe to:
Post Comments (Atom)
No comments:
Post a Comment